Side adapters (Caps) compatible only with Noxon / PMP Nitro and Engage front hubs. Compatible with Noxon and PMP wheels: Explorer, Evolution, Nitro, Nitro Race, Nitro Carbon in the 15x100 mm version. With this kit you can modify the through diameter of the axle and adapt the hub according to the specifications in the measure 12x100mm.
The inside diameter of the through holes is 15 millimeters. Please double check before purchasing in order to avoid choosing an incompatible component.
The product is equipped with new seals to prevent dirt from entering the front hub and to protect the bearings.
Recommendations:
- When replacing this spare part, remember to carefully clean the internal surface where the ring nut for coupling the ratchets is housed.
- Grease the axle with a thin layer of grease (not lithium). Preferably, use a grease of the silicone type or in any case particularly viscous.
- Check the cleanliness of the system approximately every 10 rides. to preserve and give the component longer life.
Usage: Our technology allows for quick and easy disassembly of hub adapters (push system). You just need to exert a little force to remove them. You will feel some friction due to the interference of a small gasket placed inside the adapters, which will allow you not to lose them during a possible disassembly of the wheel.